Glass water bong to be recycled do you know

Glass water bong is more and more used in daily life, more and more loved by people, glass quality products have very good performance characteristics. Hefei Xingda Glass Products Factory specializes in the production of a variety of glass products, our main products are water bong, glass water bong, glass water bong and other products. Glass water pipe when recycling the plant's broken glass, to make up for the loss of evaporation of oxides, and adjust the material side, adhere to the composition of the glass remains unchanged. When the share of broken glass is large, to make up for the amount of clearing agent.

When using foreign broken glass, to clean and remove impurities. Together, it is necessary to take samples for chemical analysis. According to its chemical composition of the ingredients. The particle size of broken glass, there is no strict rules, but should be uniform and common according to practice, such as the particle size of broken glass and the size of the other materials of the cooperative material, the glass fume gun will give priority to soda ash and broken glass reactions, so that the quartz sand melting difficult, the whole melting process to slow down and become worse. The size of broken glass, should be much larger than the size of other materials, so help to avoid the cooperation material layering, and make the melting melt accelerated.

Generally speaking, the size of broken glass between 220mm, melting faster, but taking into account the flake, tube and other factors such as processing of broken glass, usually choose 2040mm particle size. Glass water fume gun 6. The quality of cooperation material request

A, with the correctness and stability of the chemical composition of various materials in the cooperative guess moisture and granularity should adhere to the relative stability to ensure that the composition of the molten glass with correctness and stability.

B, with a certain moisture moisture plays a favorable role in the uniformity of the cooperative material dry material is not easy to mix uniformly easy to stratify the melt obscure material granularity changes in the cooperative material water addition also changes the finer the particles plus water should be more.

C, with a certain gas rate, in order to make the glass easy to clear and homogenization, the cooperation is necessary to contain a part of the material can be divided out of the gas, such as boric acid, aluminum hydroxide, sodium nitrate, etc., the amount of escaping gas and the ratio of the amount of cooperation material, known as the gas rate.

D, must be mixed uniformly, cooperation material is not uniform, will make the cooperation in the fusible soda ash, borax and other materials to accelerate the melting speed, while the cooperation in the refractory quartz sand melting difficult, and ultimately lead to the existence of residual unmelted quartz sand particles in the glass liquid, damage to the uniformity of the glass, and then produce stones, streaks, bubbles and other defects. In addition, because the cooperation material is not uniformly mixed, the presence of easy material in the refractory material corrosion is severe. The above is a simple introduction of our glass water fume gun, if you have any questions or needs, welcome to our company to learn more about the consultation.